Products
Warranty
Faq
About Us
Contact Us
Where to Buy
Product List
TELEPHONE LINE PROTECTION: CTP2-M
SURGE PROTECTION
PLUG-IN
- PowerGuard Extreme Computer
- PowerGuard Extreme Home Theatre
- PowerGuard Extreme Notebook
- PowerGuard Notebook Protector
- PowerGuard Duo
- PowerGuard Duo Extended Delay
- PowerGuard Games Console Protector
- VoltGuard Duo

HARDWIRED
- Telephone Line Protection CTP2-M
- Continuous Hub Protection CHP4-M
- Voltage Level Detector 3VLB-M
- Sequence Level Detector 3SVLD-M
- Continuous Mains Protector CMF2
- Continuous Mains Protector CMF2-M
- Continuous Mains Protector CMF3
- Surge Diverter SD1-M
- Surge Diverter SD3-M
- Industrial Grade UPS 300
- Industrial Grade UPS 1000
- Marine Surge Bloc 400M
- Automotive Surge Bloc 400A

UPS (Uninterruptible Power Supply)
OPTI-UPS Australian Distributor

OFFLINE - CLEVER SERIES
- CS500B

OFFLINE - VALUE SERIES
- VS375C
- VS575C

LINE INTERACTIVE - ENHANCED
- ES1000C-USB
- ES800C-USB
- ES1500C-USB

ON-LINE - DURABLE SERIES
- DS1000B
- DS2000B
- DS3000B
- DS1000B-RM Rackmount
- DS2000B-RM Rackmount
- DS3000B-RM Rackmount

SOFTWARE
- Downloads
FEATURES

- Industrial grade filter (RFI)
- Protection on all lines
- Suits both RJ45 and RJ11 type connectors
- Easy replacement
- Low cost
- Patent Pending
DESCRIPTION
Damaging spikes and surges emanating on the telephone lines can easily be surpressed and diverted to earth by means of the unique CTP2 (Module). This DIN rail (35mm) mountable clip-on unit is equipped with two RJ45 connectors and plug in earth connector.

The unit absorbs and diverts to earth spikes and surges while protecting the equipment that is hooked onto the PSTN and is particularly recommended for the protection of Modems and Information Circuits. A further unique feature is the Full RFI Filtration System - it is very useful in areas where modems are not working at their optimum potential due to RFI interference.
(NATA performance test report on patented circuit available on request)

ACCESSORIES (Optional)
A 19" bracket equipped with a DIN rail 35mm, type RMC2, is available as support for the CTP2. This recessed bracket can be mounted into the distribution rack and support up to 24 modules. The earth connection is looped from one module to the next.
SIZE: 484mm (19") W x 88mm (2U) H x 65mm D (1 - module wide)
INCLUDES: Earth pickup connector.
24 Single modules wide (17,5mm)

SPECIFICATIONS - AC ELECTRICAL
TYPICAL APPLICATIONS
Nominal voltage between communication lines :
Nominal voltage between lines and earth :
RF Filter :
Max absorption (10/20 microS) :
Response time (for 100 Amp) :
Temperature range :
Housing :
Protection :
200 VDC
500 VDC
75dB at 1Mhz 300 Ohm line impedance
20KA
1.0 picoS*
-20°C - 60°C
Self extinguishing Noryl UL V-0
IP40 		- PABX Systems using RJ connections
- ISP's (Internet service providers)
- Any system subjected to RFI
CONNECTIONS DIMENSIONS
Communication :
Earth :

RJ45 or RJ11
Plug in top or bottom
Lift up terminals
Solid wire 0.2-2.5
Flexible 0.2-2.5
AWG 24-12

SIZE : 17.5mm W x 90mm H
(1 module wide)
WEIGHT : 40 grm

     
Site Map Disclaimer Privacy Policy