Products
Warranty
Faq
About Us
Contact Us
Where to Buy
Product List
SEQUENCE LEVEL DETECTOR: 3SVLD-M
SURGE PROTECTION
PLUG-IN
- PowerGuard Extreme Computer
- PowerGuard Extreme Home Theatre
- PowerGuard Extreme Notebook
- PowerGuard Notebook Protector
- PowerGuard Duo
- PowerGuard Duo Extended Delay
- PowerGuard Games Console Protector
- VoltGuard Duo

HARDWIRED
- Telephone Line Protection CTP2-M
- Continuous Hub Protection CHP4-M
- Voltage Level Detector 3VLB-M
- Sequence Level Detector 3SVLD-M
- Continuous Mains Protector CMF2
- Continuous Mains Protector CMF2-M
- Continuous Mains Protector CMF3
- Surge Diverter SD1-M
- Surge Diverter SD3-M
- Industrial Grade UPS 300
- Industrial Grade UPS 1000
- Marine Surge Bloc 400M
- Automotive Surge Bloc 400A

UPS (Uninterruptible Power Supply)
OPTI-UPS Australian Distributor

OFFLINE - CLEVER SERIES
- CS500B

OFFLINE - VALUE SERIES
- VS375C
- VS575C

LINE INTERACTIVE - ENHANCED
- ES1000C-USB
- ES800C-USB
- ES1500C-USB

ON-LINE - DURABLE SERIES
- DS1000B
- DS2000B
- DS3000B
- DS1000B-RM Rackmount
- DS2000B-RM Rackmount
- DS3000B-RM Rackmount

SOFTWARE
- Downloads
FEATURES

3 PHASE SEQUENCE LEVEL DETECTOR
- Industrial grade protection
- Compact multifunction controller
- Easy replacement
- Low cost
- Can be linked with Building Management Systems

DESCRIPTION
The 3SVLD-M (Module) is a highly intelligent detector with multiple functions, voltage level, phase presence and sequences and time delays. The three phases are compared against the neutral, the control relay with drop out if one of the functions is not met and will switch off the mains supply to the equipment that is to being protected. A front delay of 800mSeconds enables the controller to withstand a voltage dip during initial start up. An additional delay is built in to give the controller a longer delay that can be overidden by pushing the override button situated on the front of the unit, a LED indicates the ON condition and also if a fault did occur. The unit is designed to drive an electrical contactor set (To be sourced separately) if not already included with the motor.
SPECIFICATIONS - AC ELECTRICAL
 TYPICAL APPLICATIONS
Supply voltage :


Supply Current :
Control Relay Contact Rating :


High Voltage Setting Each Phase :
Low Voltage Setting Each Phase :
Delay before drop-out :
Delay before auto timer re-set :
Controls :
Indicators :


Terminals Rating :
Lift up Terminals :



Mounting :
Housing :
Temperature :
Protection : IP40
380/440 V AC 50HZ 3 phase + Neutral

Approximately 35mA AC
Single pole 5 Amp 250V AC Resistive

180V AC (from Phase to Neutral) 250V AC (from Phase to Neutral) 800mSec
Approximately 3.5 min
External reset button
On and fault indicators on front panel

30 Amps 500V AC
AWG 24-12
Flex 0.2-2.5
Solid 0.2-4

DIN Rail - EN 50022-35
Self Extinguishing Noryl UL V-0
-20°C - 60°C
IP40

- Electric motors used on pumps, compressors, etc.
- Equipment which requires staggered switch on after a blackout or shut down.

DIMENSIONS

SD1-M : 106mm W x 90mm H x 58mm D
(6 Modules Wide)
WEIGHT : 160 grm
     
Site Map Disclaimer Privacy Policy